Instructions for Use & Warranty

Meet our Foam Cases –  Hybrid 300 Series

Instructions for Use

EVA carrying cases with integrated zipper closure system. Please read these instructions before first use and keep them for reference.

Off-the-Shelf-Hybrid-300-range

Getting Started

Intended use
The Shell‑Case Hybrid 300™ Series is intended for the transport, organization, and protection of professional equipment, instruments, samples, electronics, tools, and accessories during normal handling and travel. Suitable for commercial, industrial, medical, demonstration, and personal equipment‑transport applications.
 
Product description
  • Semi‑rigid, lightweight EVA protective shell
  • Textile outer surface with water‑repellent coating
  • Zipper closure system
  • Soft inner lining or configurable insert system
  • Carry handle
  • Optional shoulder strap attachment points (selected models)
  • Optional foam inserts, dividers, or pouches
 
Before first use
  • Inspect the case for shipping damage.
  • Verify that the zipper opens and closes smoothly along its full track.
  • Confirm that inserts or foam are properly installed.
  • Ensure the case size and configuration are suitable for the intended contents.
  • If custom foam has been supplied, verify the fit of the product before transport.

Using Your Case

Loading the case
  • Place heavier items at the bottom or center of the case.
  • Cover or otherwise protect sharp edges before placing contents.
  • Secure loose accessories in dedicated pockets or compartments.
  • Do not overload the case beyond the zipper’s closure capability.
  • Confirm that contents do not press excessively against the lid.

Opening and closing the zipper

The zipper is the case’s primary closure and should be operated with steady, moderate force only.


Opening
  • Place the case steady.
  • Pull the slider gently along the track, without excessive force, until you reach the end of the track.
  • Do not try to open the case until the zippers are placed at the end of the track.
  • Keep the zipper path clear of fabric, debris, or internal components before pulling.

Closing
  • Align both sides of the zipper track before starting.
  • Pull the slider smoothly along the full length of the track.
  • Do not force the zipper around oversized or protruding contents.
  • Confirm the zipper is fully and evenly closed before lifting or carrying the case.

General handling
  • Do not overfill the case — excess internal pressure strains the zipper.
  • Keep fingers, loose items, and straps clear of the zipper path during operation.
  • Do not use the zipper as a carrying handle or load‑bearing point.

Carrying and transport
  • Carry the case by its handle only once the zipper is fully closed.
  • Use the shoulder strap only on models with attachment points.
  • Avoid dropping, throwing, crushing, or stacking excessive weight on the case.
  • For wheeled travel or shipping, additional outer packaging may be recommended.

Care & Environment

Environmental use and limitations
  • Suitable for normal indoor and outdoor handling.
  • The water‑repellent exterior resists light rain or moisture only; the case is not waterproof or submersible.
  • Avoid prolonged direct sunlight, extreme heat, open flame, and corrosive chemicals.
  • Avoid sand, saltwater, and ice buildup, all of which can impair zipper function.

 

Cleaning
  • Wipe the exterior with a damp cloth and mild soap; air dry fully before storage.
  • Clean the zipper with a soft brush or dry cloth to remove dust and debris.
  • If needed, apply a light, compatible zipper lubricant; avoid oils that may degrade materials.
  • Do not machine wash, bleach, or use solvents on any part of the case.

Storage
  • Store the case clean and dry, with the zipper fully closed to preserve its shape and alignment.
  • Avoid compression under heavy loads or prolonged stacking during storage.

Maintenance and inspection
  • Periodically inspect the handle, zipper, strap anchors, and interior inserts.
  • Check the zipper specifically for debris in the teeth or coil, track misalignment or separation, and damage to the slider or pull tab.
  • Replace worn accessories as needed.
  • Zipper components are not user‑repairable; contact the manufacturer or an authorized service provider for repair or replacement.

Safety, Service & Disposal

Warnings and precautions
  • This case does not guarantee protection from all impact or mishandling; secure fragile or high‑value contents additionally.
  • Keep away from small children if the case contains detachable accessories.
  • Do not force the zipper if resistance is encountered — inspect for obstructions before continuing.
  • Always run the zipper fully to the end of the track; stopping short can strain the slider.
  • Not intended as a life‑support, sterile‑barrier, or certified shipping container unless specifically validated for that use.

 

Service and discontinued use
  • Discontinue use of the case for protective transport if the zipper shows significant wear, separation, or failure.
  • Contact the manufacturer or an authorized service provider for repair or replacement options.

 

Disposal

Dispose of the case according to local regulations for mixed textile, EVA, and plastic materials.

Limited Lifetime Warranty

Shell-Case Designs LTD warrants its Hybrid Line EVA cases to be free from defects in materials and workmanship for the lifetime of the product under normal use.

Accessibility Toolbar

× ❮ ❯